Showing all 5 results
Engineered Filtration, Inc. engineers and supplies coolant filtration systems for grinding machines and machine tools, from 13 GPM single machine units to 528 GPM central systems, stocked in Dandridge, Tennessee, and customized and upgraded in house before they ship. Every model on this page has its flow rates, dimensions and media published as a table on its own page, so a buyer can size a system without opening a datasheet.
Clean coolant protects wheel life, surface finish and dimensional tolerance. The right way to keep it clean depends on the flow rate, the swarf, the coolant type and the floor space. EFI supplies all four common technologies, which means the recommendation is not tied to the one product a single manufacturer happens to make.
A flat bed of disposable media, indexed forward automatically as it loads. The economical choice for continuous filtration on machine tools up to 132 GPM of emulsion or 79 GPM of neat oil, where an operator is on hand to change the media roll. Ten models, 500 mm to 1400 mm media width.
Coolant is held above the media under hydrostatic pressure, so a compact cake layer forms and filtration quality improves as the cycle runs while media consumption falls. Seven models from 42 to 528 GPM of emulsion. The Hydroflux 150 and 250 cover the same flows as the larger Index units in a shorter footprint, for installations where floor space is the constraint.
A rotating magnetic disc strips ferrous swarf such as steel and cast iron grinding fines out of the coolant before it reaches the media, cutting media consumption and extending the interval between changes. Twelve models from 13 to 528 GPM, each matched to an Index or Hydroflux model. The Automag does not capture aluminum, brass, copper, carbide or composites; for those, media filtration does the work on its own.
A permanent drum screen with automatic backwash, for applications where disposable media is not wanted. Specifications on request.
Centerless grinding, surface grinding, creep feed grinding, ID and OD grinding, abrasive belt grinding and cutoff saw coolant. The full application guide, with a selection table across all four technologies, is on the grinding machine coolant filtration page.
Polyester PLS grades from 10 to 50 micron, rayon TEX grades from 15 to 45 micron, and polypropylene PLPWW grades that remove solids and absorb tramp oil at the same time. Widths from 300 mm to 1500 mm, matched to every Index model by part number on the filter media page.
Send the machine type, the coolant type, the flow rate and the material being ground, and an EFI engineer will recommend a model and pair it with the right magnetic separator and media grade. Founded in 1995, EFI stocks its coolant filtration lines at 2866 Bee Carter Rd in Dandridge, Tennessee, and customizes and upgrades them in house, so a unit can ship configured for your machine rather than as a catalog item. Request a quote below or call 865-344-0184, Monday to Friday, 8:00 am to 5:00 pm Eastern.
Self-Cleaning Drum Filters Introducing our state-of-the-art Autoflux self-cleaning drum filters – an innovative solution designed for the filtration of both magnetic ...
View more
Magnetic Separators Introducing the remarkable Automag magnetic separators – your gateway to proficiently separating magnetic sludge from industrial coolants sourced ...
View more
The CLEAN TOWER range allows for filtration of any solid particles in suspension in the machine tool’s tanks, ensuring systems that always work cleanly and ...
View more
Hydroflux Deep Bed Coolant Filter Discover the remarkable filtration capabilities of our Hydroflux, designed to efficiently handle both magnetic and non-magnetic ...
View more
Index filters Experience the exceptional filtration capabilities of our Gravity Index filters, designed to provide optimal performance for both emulsions and neat oil. ...
View moreFour: gravity bed filters (Index series, 13.2 to 132 GPM), hydrostatic deep bed filters (Hydroflux series, 42 to 528 GPM), self cleaning drum filters (Autoflux series) and magnetic separators (Automag series, 13 to 528 GPM). All four are stocked in Dandridge, Tennessee, customized and upgraded in house, and every model's specifications are published as a table on its product page.
Match the filter's emulsion or neat oil rating to the machine's coolant return flow in GPM, then step up to the next model if there is no exact match. Never step down and never run a filter past its rated capacity. An Index 100 at 26.4 GPM of emulsion serves a typical single grinder; the flow table on each product page lists all ten Index and seven Hydroflux models.
Whenever the swarf is ferrous, meaning steel or cast iron. The Automag removes the bulk of those fines before the media and cuts media consumption. Every Index and Hydroflux model has a matched Automag, from the Automag 50 at 13 GPM to the Automag 2000P at 528 GPM. It does not capture aluminum, brass, copper, carbide or composites.
PLS 35 polyester at 35 micron is the standard grade for most grinding. Use PLS 50 at 20 micron for finish work, PLS 70 at 10 micron for mirror finish, and PLPWW polypropylene where tramp oil is the problem, because it absorbs oil while filtering solids. Polypropylene is for water based emulsion only; polyester and rayon suit both emulsion and straight oil.
A gravity bed (Index) lets coolant fall through the media under its own weight; a hydrostatic filter (Hydroflux) holds coolant above the media under a head of pressure, so a compact cake forms and filtration gets finer as the cycle runs while using less media. The Hydroflux also covers higher flows, 42 to 528 GPM, in a shorter footprint at the same rating.
Yes. EFI cross references replacement filter elements to 296 OEM brands, and the Filter Finder on this site matches a part number to an EFI equivalent. Request a quote with the OEM part number and an EFI engineer confirms fit, media and micron rating.