High Efficiency Pleated Cartridges | MH Series Cartridges
Product Categories

Products Details

MH Series Cartridges

Filter Finder

MH Series

99.98% High Efficiency Pleated Cartridges
With the most complete line of pleated filter cartridges Shelco‚ offers the most economical high efficiency pleated elements available. For your most critical throughput, the MH Series is the best solution to your filtration problems. The cartridge is made of pleated Polypropylene or Polyester media and has verified efficiencies of 99.98% at the rated micron. With more then 5_ square feet of media this cartridge will last longer and has a higher dirt holding capacity then any other cartridge available. With standard lengths to fit most housings, these cartridges are the perfect choice when economy and efficiency are critical.


  • Micron ratings from 0.2 to 50 microns
  • Micron removal efficiency ratings at 99.98%
  • Meets requirements of the FDA for food and beverage applications
  • More surface area, more pleats, and more media offer higher dirt holding capacities
  • Polypropylene, Polyester or Glass fiber construction offers a wide range of chemical compatibility
  • Fixed pore construction allows for higher dirt holding capacity without unloading as the differential pressure increases


  • RO Prefilters
  • Food & Beverage
  • Potable Water
  • Pharmaceuticals
  • Electronics
  • Waste Water
  • Cosmetics
  • Ultra Pure water
  • Photographic & Chemical solutions

Product Specifications

Microns Ratings
0.2, 0.45, 1.0, 2.0, 5.0, 10.0, 25.0, 50.0
Nominal Lengths
5″, 9 3/4″ 10″, 20″, 30″, 40″
Materials of Construction
  • Filter Media: Polypropylene Polyester Glass Fiber
  • Inner Core: Polypropylene Polyester Polypropylene
  • Cage: Polypropylene None Polypropylene
  • Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton,
Teflon Encapsulated Silicone Please consult with EFI for proper compatibility

FDA Compliance

Shelco‚ MicroSentry™ High Efficiency cartridges are manufactured of pure polypropylene materials with no additives or other manufacturing agents. Shelco‚ certifies that all materials used in the production of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations 174.5 and 177.1520.
Part Number Code
MHP-Polypropylene 0.2 5 S1=DOE w/ Flat Gaskets B=Buna-N
MHE-Polyester 0.45 975 S2=DOE w/ Flat Gaskets & Extended Core E=Ethylene Propylene
MHG-Glass Fiber 1.0 10 S3=222 w/ Fin End S=Silicone
2.0 20 S4=222 w/ Flat End V=Viton
5.0 30 S5=226 w/ Fin End T=Teflon Encapsulated Silicone
10.0 40 S6=226 w/ Flat End
Part Number Example:MHP-0.2-10-S2E; Polyester available in 2.5, & 25 Micron Ratings Only; Glass Fiber available in 0.3, 0.5, 1.0, & 3.0 Micron Ratings Only
Get a quote