Product Categories
Products Details

Gravity Bed Coolant Filters: Index Flat Bed Series

Index filters

Experience the exceptional filtration capabilities of our Gravity Index filters, designed to provide optimal performance for both emulsions and neat oil. With a filtration grade range of 50 to 10 microns, determined by the choice of filter fabric, these filters offer versatility and efficiency in coolant filtration. When combined with our AUTOMAG magnetic separators, you can achieve enhanced filtration grades for industrial coolants while minimizing filter fabric consumption.

Choose from a diverse selection of Gravity Index filter models to precisely match your machine tool’s coolant filtration needs. Avoid inefficiencies and excessive consumptions with the ability to customize the filtration system to your specific requirements. The Gravity range ensures the right coolant filtration system is seamlessly integrated, offering reliable and effective performance, thanks to Engineered Filtration Inc.’s meticulous research and engineering expertise.

The GRAVITY series, part of our indexing media coolant filters, represents a versatile solution for machine tool coolant filtration. The meticulously perfected design of the GRAVITY coolant filter is a result of thoughtful research and smart engineering, delivering consistent and dependable indexing media filtration. These coolant filters cater to various metalworking and grinding machines, accommodating emulsions and whole oils at different flow rates, while filtration levels are tailored to suit the filter media used.

Applications encompass a wide range, including centerless grinding, surface grinding, creep feed grinding, ID grinding, OD grinding, abrasive belt grinding, and cutoff saw coolant filtration.

Working Process:
  1. Dirty Coolant Entry: Contaminated coolant is introduced through the coolant inlet of the Index filter, where it spreads across the filter fabric. Pollutant particles are captured, allowing clean coolant to flow into the clean coolant containment tank.
  2. Filtration Process: The filter fabric gradually collects pollutants until clogged. When the coolant cannot pass through the saturated fabric, the liquid level rises, activating a float mechanism. This float initiates the advancement of the filter fabric, replacing the used material with new fabric.
  3. Recycling of Filtered Coolant: The used filter fabric is collected in a dedicated tank for disposal, while the clean coolant can be efficiently pumped back to the machine tool for continued use.

Experience the unmatched efficiency and reliability of Gravity coolant filters, designed to optimize your machining operations, and maintain pristine coolant quality.

Index specifications

Index flat bed coolant filter: flow rates and drive by model
ModelEmulsion (LPM)Emulsion (GPM)Neat oil (LPM)Neat oil (GPM)Media conveyor drive motor (kW)Voltage (V)PhaseFiltration range (micron)
Index 505013.2307.90.06230/460Three10 to 50
Index 10010026.46015.80.06230/460Three10 to 50
Index 15015039.68021.10.06230/460Three10 to 50
Index 20020052.810026.40.06230/460Three10 to 50
Index 25025066.013034.30.18230/460Three10 to 50
Index 30030079.216042.20.18230/460Three10 to 50
Index 35035092.418047.50.18230/460Three10 to 50
Index 400400105.622058.10.18230/460Three10 to 50
Index 450L450118.825066.00.18230/460Three10 to 50
Index 550L500132.030079.20.18230/460Three10 to 50

The model number sets the flow rate the unit handles, not the filtration grade. Every Index model filters from 10 to 50 micron, which is the full span of the media range.

The Index range tops out at 132 GPM of emulsion. Index units are not installed in parallel, so above that flow the Hydroflux takes over.

The Index line is a prebuilt, stocked product. Small changes can be made to a stock unit, such as adding an end of roll switch or changing the pump. Where the requirement goes beyond that it becomes a special coolant filter, and the Hydroflux is the right frame.

The motor listed drives the conveyor that moves the filter media. The pump is matched to the application requirement, so no pump rating is published.

Index flat bed coolant filter: dimensions and tank capacity by model
ModelLength (in)Height (in)InletMedia width (mm)Tank (gal)
Index 5066.926.41 in G50052.8
Index 10072.826.61.5 in G70079.2
Index 15080.726.61.5 in G1000132
Index 20010027.02 in G1000158.5
Index 25012027.32.5 in G1000192.8
Index 300139.727.32.5 in G1000229.9
Index 35015927.53 in G1000264
Index 40018327.53 in G1000303
Index 450L13936.54 in G1400317
Index 550L15936.54 in G1400369

The L designation indicates a wider filter bed, giving more surface area for higher flow. Dirty coolant inlet height is 15.55 inches without an Automag and 18.85 inches with an Automag and gravity diffuser.

Inlet connections are G, a BSP parallel thread, on US units as well.

The Index 400 is the longest unit at 183 inches. The Index 550L is the highest flow at 132 GPM, rated 500 LPM.

Index flat bed coolant filter: standard media part numbers by model
ModelMedia widthStandard, PLS 35Finish grinding, PLS 50Tramp oil, PLPWW 25
Index 50500 mmPLS 35/500/100PLS 50/500/100PLPWW 25/500/200
Index 100700 mmPLS 35/700/100PLS 50/700/100PLPWW 25/700/200
Index 150 to 4001000 mmPLS 35/1000/100PLS 50/1000/100PLPWW 25/1000/200
Index 450L, 550L1400 mmPLS 35/1400/100PLS 50/1400/100PLPWW 25/1400/200

The part number format is grade, then width in millimeters, then roll length in yards. The leading number is the media weight in grams per square meter, not the micron rating.

Is the Index the right choice?

Choose the Index flat bed filter for economical continuous filtration on machine tools up to 132 GPM of emulsion or 79 GPM of neat oil, where an operator is on hand to watch the media roll.

Look at the Hydroflux instead if the flow is higher than the Index range, if floor space at that flow is tight, or if filtration quality has to improve as the cycle runs.

Every Index and Hydroflux model has a matched Automag model; the pairing guide is on the Automag page.

Index selection and installation

  • Above 132 GPM of emulsion, or where floor space is constrained, the Hydroflux replaces the Index. Index units are not installed in parallel.
  • The Index is the economy model in the range, and the operator watches the media roll and changes it before it runs out. An end of roll switch is an optional addition on the Index; on the Hydroflux it is standard.
  • Never run any filter past its rated capacity.
  • The transfer pump serves the dirty side and the clean coolant pump serves the clean side. The two are never interchanged.

Related: grinding machine coolant filtration

×
Get a quote