Description

Working cycle

1. The low-pressure transfer pump transfers the contaminated coolant from the machine tool tank to the PowerBoost system.
2. The duplex filter housing separates fine particles and foreign matter from the coolant and protects the high pressure pump from damage.
3. The filtered coolant flows into the unit’s storage tank.
4. The high-pressure pump feeds the machine tool with cleanmetalworking lubricant through one of or more of the switchable outputs.
5. The Siemens PLC and HMI touch screen allows control of the Powerboost system and displays the main operating data of the system.

Technical data – standard model

• Model: POWERBOOST
• Flowrate: 5.28 gpm (only neat oil)
• Max. Pressure: 725 psi
• HP Pump Power: 2.95 hp
• LP Pump Power: 1.01 hp
• Noise Level: 76 dB(A)
• Filtration Efficiency: 60 microns
• Weight: 462 lbs
• Tank Capacity: 48 gallons
• Dimensions: 20.08 x 39.37 x 51.81 inches (L x W x H)
• Standard Voltage: 460 V/3 PH/60 Hz

Included in standard supply

• Gear pumpfor neat oil, screw pump for water basedemulsions
• Low-pressure dirty coolant transfer pump, 10 gpm (40 liters per minute)
• Overpressure relief valve on high-pressure hydraulic circuit
• Automatic Duplex filtration system
• Pressure gauge on low-pressure line
• Digital pressure switch with high-pressure line display
• HMI 4” Siemens DIGITAL DISPLAY
• PLC machine tool interface (if machine tool supports this function)
• Liquid level switches control the low pressure transfer pump

Optional Components

• Up to eight (8) hydraulic connections available
• Up to 1029 psi (70 bar) pumps available
• VFD/Inverter motor for better pressure control
• Digitallevel sensor for continuous level control on internal tank
• Hose connection kits